[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring an NTP Peer on a C-series Controller (SRC CLI)
Use the following configuration statements
to configure NTP on a C-series Controller to operate in symmetric
active mode:
- edit system ntp peer address {
- version version;
- prefer;
- }
To configure NTP to operate in symmetric
active mode:
- From configuration mode, access the configuration statement
that configures an NTP peer, and specify the IP address or hostname
of an NTP peer.
- [edit system ntp]
- user@host# edit peer address
For example, to specify an NTP peer that
has an IP address of 192.0.2.40:
- [edit system ntp]
- user@host# edit peer 192.0.2.40
- [edit system ntp peer 192.0.2.40]
- user@host#
- (Optional) Specify the version of NTP to be used for outgoing
packets.
- [edit system ntp server address ]
- user@host# set version version
- (Optional) If you configure more than one peer, specify
whether this server is to be contacted first for synchronization.
- [edit system ntp server address ]
- user@host# set prefer
Related Topics
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
