[Contents] [Prev] [Next] [Index] [Report an Error]

Starting the SAE with the C-Web Interface

You must configure licenses before you start the SAE. When you start the SAE, the software verifies that a valid license is available. If no license is found, the SAE does not start.

To start the SAE:

  1. Click Manage>Enable.

    The Enable pane appears.

  2. From the Component list, select SAE, and click OK.
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.