SRC-PE 2.0.x Network Guide > Configuring NIC with the SRC CLI > Testing a NIC Resolution with the SRC CLI

Testing a NIC Resolution with the SRC CLI

To test a NIC resolution:

• Run the test nic resolve command.

user@host> test nic resolve <locator locator> <key key> 

where:

• locator—Name of locator that requests information on behalf of an application
• key—Value to be resolved. This value must be of the same NIC data type configured in the NIC locator.

For example:

user@host> test nic resolve locator /nicLocators/ip key 10.10.10.10

Example: Testing a NIC Resolution

The following example shows a successful resolution for an IP key that has the value 192.168.8.2:

user@host> test nic resolve locator /nicLocators/ip key 192.168.8.2

IOR:

000000000000003549444C3A736D67742E6A756E697065722E6E65742F7361652F5365727669
636541637469766174696F6E456E67696E653A312E3000

000000000000010000000000000068000102000000000F3137322E32382E3233302E31323000
0022610000000000107372632D382F736165504F412F53

4145000000020000000000000008000000004A414300000000010000001C0000000000010001
0000000105010001000101090000000105010001

user@host>

The following example shows an unsuccessful resolution for an IP key that has the value 192.168.8.2:

user@host> test nic resolve locator /nicLocators/ip key 192.168.3.2

Failed to resolve key 192.168.3.2 for resolver /nicLocators/ip due to 
net.juniper.smgt.gateway.nic.protocol.NICExc

IDL:net/juniper/smgt/gateway/nic/protocol/NICException:1.0

user@host>

Related Topics

• Configuring NIC Test Data with the SRC CLI