Setting the Terminal Type for the SRC CLI

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

SRC-PE 2.0.x CLI User Guide > Controlling the SRC CLI Environment > Setting the Terminal Type for the SRC CLI
Setting the Terminal Type for the SRC CLI

To set the terminal type:
Use the set cli terminal command.
user@host> set cli terminal terminal-type 
The terminal type can be one of the following: ansi, vt100, xterm, or dumb.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]