[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

SRC-PE Release 1.0.x Subscribers and Subscriptions Guide > Configuring Subscribers and Subscriptions with the SRC CLI > Adding Enterprises

Adding Enterprises

Use the following configuration statements to add an enterprise subscriber:

subscribers retailer name subscriber-folder folder-name enterprise name {

display-name display-name;

accounting-user-id accounting-user-id;

description description;

scope [scope...];

substitution [substitution...];

}

To add an enterprise subscriber:

  1. From configuration mode, enter the enterprise subscriber configuration. In this procedure, ABCInc is the name of the enterprise subscriber. 
    2. user@host# edit subscribers retailer default subscriber-folder local enterprise
ABCInc
  2. (Optional) Configure the name that is displayed in enterprise management portals, if different from the enterprise name. 
    3. [edit subscribers retailer default subscriber-folder local enterprise ABCInc]

    user@host# set display-name display-name
  3. (Optional) Configure the name that identifies the enterprise in accounting records.
    4. [edit subscribers retailer default subscriber-folder local enterprise ABCInc]

    user@host# set accounting-user-id accounting-user-id
  4. (Optional) Enter a description of the enterprise. 
    5. [edit subscribers retailer default subscriber-folder local enterprise ABCInc]

    user@host# set description description
  5. (Optional) Assign service scopes to the enterprise.
    6. [edit subscribers retailer default subscriber-folder local enterprise ABCInc]

    user@host# set scope [scope...]
  6. (Optional) Configure the actual values for parameters associated with this enterprise.
    7. [edit subscribers retailer default subscriber-folder local enterprise ABCInc]

    user@host# set substitution [substitution...]
  7. (Optional) Verify your configuration.
    8. [edit subscribers retailer default subscriber-folder local enterprise
ABCInc]

    user@host# show

    display-name ABCInc;

    description "This enterprise is sample data for use with JUNOSe routers.

    The attached EntJunose scope contains enterprise services that are designed
to work with JUNOSe.

    scope [ EntJunose POP-Ottawa POP-Boca POP-Boston POP-Montreal ];

    substitution [ "acct : network = 208.93.36.80 / 28" "eng : network =
208.93.36.64 / 28" ];
  8. Configure an access subscription for the enterprise. (See Configuring Accesses.)

Configuring Administrative Information for Enterprise Subscribers

Use the following configuration statements to configure administrative information about the enterprise subscriber: 

subscribers retailer name subscriber-folder folder-name enterprise name info {

phone phone;

fax fax;

po-box po-box;

city city;

street street;

state state;

postal-code postal-code;

}

To add administrative information about enterprise subscribers:

  1. From configuration mode, enter the enterprise subscriber info configuration. For example:
    2. user@host# edit subscribers retailer default subscriber-folder local enterprise
ABCInc info
  2. (Optional) Configure a phone number for the subscriber. 
    3. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set phone phone
  3. (Optional) Configure a fax number for the subscriber. 
    4. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set fax fax
  4. (Optional) Configure a post office box for the subscriber. 
    5. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set po-box po-box
  5. (Optional) Configure the city for the subscriber. 
    6. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set city city
  6. (Optional) Configure the street address for the subscriber. 
    7. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set street street
  7. (Optional) Configure a state for the subscriber. 
    8. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set state state
  8. (Optional) Configure the postal code for the subscriber. 
    9. [edit subscribers retailer default subscriber-folder local enterprise ABCInc info]

    user@host# set postal-code postal-code
[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]