SRC-PE Release 1.0.x Solutions Guide > Configuring the JPS on a Solaris Platform > Starting and Managing the JPS

Starting and Managing the JPS

After you have installed the JPS and applied the local configuration of the JPS, you can perform these tasks:

• Starting the JPS
• Restarting the JPS
• Stopping the JPS
• Displaying JPS Status

To modify the JPS configuration, see Configuring the JPS. To monitor the JPS configuration, see Monitoring the JPS.

Starting the JPS

You must start the JPS when you install the JPS without rebooting the JPS host.

To start the JPS:

1. On the JPS host, log in as root or as an authorized nonroot admin user.
2. Start the JPS from its installation directory.

For root user: /opt/UMC/jps/etc/jps start

For nonroot user: /opt/UMC/jps/etc/jpsroot start

The system responds with a start message. If the JPS is already running, the system responds with a warning message.

Restarting the JPS

To restart the JPS:

1. On the JPS host, log in as root or as an authorized nonroot admin user.
2. Restart the JPS from its installation directory.

For root user: /opt/UMC/jps/etc/jps restart

For nonroot user: /opt/UMC/jps/etc/jpsroot restart

The system responds with a start message. If the JPS is already running, the system responds with a shutdown message and then a start message.

Stopping the JPS

To stop the JPS:

1. On the JPS host, log in as root or as an authorized nonroot admin user.
2. Stop the JPS from its installation directory.

For root user: /opt/UMC/jps/etc/jps stop

For nonroot user: /opt/UMC/jps/etc/jpsroot stop

The system responds with a shutdown message. If the JPS is not running when you issue the command, the system responds with the command prompt.

To start the JPS, see Starting the JPS.

Displaying JPS Status

To display the JPS status:

1. On the JPS host, log in as root or as an authorized nonroot admin user.
2. Display the status from the JPS installation directory.

For root user: /opt/UMC/jps/etc/jps status

For nonroot user: /opt/UMC/jps/etc/jpsroot status

The system responds with a status message.