SRC-PE Release 1.0.x Getting Started Guide > Setting Up an SAE with the SRC CLI > Configuring the RADIUS Local IP Address and NAS ID

Configuring the RADIUS Local IP Address and NAS ID

Use the following configuration statements to set the local RADIUS address and network access server (NAS ID):

slot number sae radius {

local-address local-address; 

local-nas-id local-nas-id; 

}

To set the local RADIUS address and NAS ID:

1. From configuration mode, access the SAE RADIUS configuration. This configuration is under the slot 0 hierarchy.

[edit]

user@host# edit slot 0 sae radius 

2. Configure the local IP address that the SAE uses to communicate with RADIUS servers.

[edit slot 0 sae radius] 

user@host# set local-address local-address 

3. Configure the NAS ID that identifies the SAE when it sends RADIUS authentication and accounting records. Typically, the NAS ID is the name of the SAE host.

[edit slot 0 sae radius] 

user@host# set local-nas-id local-nas-id 

4. (Optional) Verify your configuration.

[edit slot 0 sae radius] 

user@host# show 

local-address 10.10.4.20;

local-nas-id SAE.host1;