SRC-PE Release 1.0.x Getting Started Guide > Configuring Local Properties with the SRC CLI > Changing the Location of Data in the Directory

Changing the Location of Data in the Directory

In most cases, you use the default configuration for the location of SRC data in the directory:

• Administrator-defined configuration data—ou=staticConfiguration,ou=Configuration,o=Management,o=umc
• Programmatically defined configuration data—ou=dynamicConfiguration,ou=Configuration,o=Management, o=umc

You can specify the full distinguished name (DN), or a DN relative to a base DN, identified as <base>.

You can change the location of data in the directory at the Expert CLI editing level.

Use the following configuration statements to change the location of data for a component in the directory:

slot number component-name initial {

    static-dn static-dn; 

    dynamic-dn dynamic-dn; 

}

To change the location of data in the directory:

1. From configuration mode, access the configuration statement that specifies the configuration for a component on a slot.

[edit]

user@host# edit slot number nic initial

For example:

[edit]

user@host# edit slot 0 nic initial

2. (Optional) Change the location of administrator-defined configuration data in the directory

[edit slot 0 nic initial]

user@host# set static-dn static-dn 

3. (Optional) Change the location of programmatically defined configuration data in the directory.

[edit slot 0 nic initial]

user@host# set dynamic-dn dynamic-dn