SRC-PE Release 1.0.x CLI User Guide > Getting Started: A Quick Tour of the CLI > Verifying System Status

Verifying System Status

You can use show commands to check system status and monitor system activity.

To help you become familiar with show commands:

1. Type show ? to display the list of show commands that you can use to monitor the SRC software and C-series platform.

user@host> show ?

Possible completions:

  acp                  Display information about ACP

  cli                  Configure properties for the CLI environment

  component            Display information about SDX components

  configuration        Information about the SDX configuration

  date                 System time and date

  disk                 Configuration for RAID disks

  interfaces           Show interface information

  iptables             Display information about the iptables LINUX tool

  jps                  Display information about the JPS

  nic                  Display information about the NIC

  ntp                  NTP configuration information

  redirect-server      Statistics for redirect server

  route                Show routing table information

  sae                  Display SAE information

  security             Display security information

  system               Display system information

2. Use the show component command to view a the status of installed components.

user@host> show component 

Installed Components

Name      Version                                            Status

cli       Release: 7.0 Build: CLI.A.7.0.0.0171               running 

acp       Release: 7.0 Build: ACP.A.7.0.0.0174               disabled

jdb       Release: 7.0 Build: DIRXA.A.7.0.0.0176             running 

editor    Release: 7.0 Build: EDITOR.A.7.0.0.0176            disabled

redir     Release: 7.0 Build: REDIR.A.7.0.0.0176             disabled

licSvr    Release: 7.0 Build: LICSVR.A.7.0.0.0179            stopped 

nic       Release: 7.0 Build: GATEWAY.A.7.0.0.0170           disabled

sae       Release: 7.0 Build: SAE.A.7.0.0.0166               running 

www       Release: 7.0 Build: UMC.A.7.0.0.0169               disabled

jps       Release: 7.0 Build: JPS.A.7.0.0.0172               disabled

agent     Release: 7.0 Build: SYSMAN.A.7.0.0.0174            disabled

webadm    Release: 7.0 Build: WEBADM.A.7.0.0.0173            disabled

3. Use the show system information command to view general system information.

user@host> show system information

System Identification

Hostname         myC-seriesPlatform

Manufacturer     Juniper Networks

Product Name     SDX-2000

Version          1.0

Serial Number    0207082006000001

UUID             48384441-5254-0030-4859-0030485977EE

Hostid           e30a2e07

Software version SDX-300 Release 7.0 [B.7.0.0-7]

System Time

Current time              2006-12-19 13:52:26 EST

Uptime                    21:30

Number of active users    3

Load Averages (1m/5m/15m) 0.02/0.07/0.02

Memory

Total 15G

Free  14G

CPU Info

Number of CPU 4

CPU Model     Dual Core AMD Opteron(tm) Processor 265

Clock Speed   1804.132 MHz

Disk Information

  Mountpoint       Total Used  Use%

  /                2015M  955M  47%

  /altroot         2015M   35M   1%

  /altvar            29G   75M   0%

  /boot              98M   14M  14%

  /var               31G  829M   2%

Temperature

System +24 C

CPU-1  +34 C

CPU-2  +36 C

Fan Speed

Fan-1 9375 RPM

Fan-2 9375 RPM