Examples: Deleting a Statement from the Configuration

Configure the aggregate-services statements, then delete these statements from the [edit] level. Using the delete command effectively unconfigures the SAE properties for aggregate-services in the SRC software:

[edit]

user@host# set shared sae configuration aggregate-services keepalive-time 172800

[edit]

user@host# set shared sae configuration aggregate-services keepalive-retry-time 900

[edit]

user@host# set shared sae configuration aggregate-services activation-deactivation-time 900

[edit]

user@host# set shared sae configuration aggregate-services failed-notification-retry-time 86400

[edit]

user@host# show 

. . .

shared { 

  sae { 

    configuration { 

      aggregate-services { 

        keepalive-time 172800;

        keepalive-retry-time 900;

        activation-deactivation-time 900;

        failed-notification-retry-time 86400;

      }

    }

   . . .

  }

}

[edit]

user@host# delete shared sae configuration aggregate-services 

[edit]

user@host# show shared sae configuration aggregate-services 

Configure the aggregate-services statements, then delete these statements from the [edit shared sae configuration aggregate-services] level:

[edit]

user@host# set shared sae configuration aggregate-services keepalive-time 172800

[edit]

user@host# set shared sae configuration aggregate-services keepalive-retry-time 900

[edit]

user@host# set shared sae configuration aggregate-services activation-deactivation-time 900

[edit]

user@host# set shared sae configuration aggregate-services failed-notification-retry-time 86400

[edit]

user@host# edit shared sae configuration aggregate-services 

[edit shared sae configuration aggregate-services]

user@host# delete 

Delete everything under this level? [yes,no] (no) yes

[edit shared sae configuration aggregate-services]

user@host# show

[edit shared sae configuration aggregate-services]

user@host#

Remove the configuration for a specific property (routing-options):

[edit]

user@host# set routing-options static route 192.0.2.20/24 reject

[edit]

user@host# show 

. . .

static { 

  route 192.0.2.20/24 {

    reject;

  }

}

. . .

[edit]

user@host# delete routing-options 

[edit]

user@host# edit routing-options

[edit routing-options]

user@host# show