Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode

To associate a parameter instance with the QoS cell mode application:

  1. Configure traffic classes.
    host1(config)#traffic-class voice
    host1(config-traffic-class)#exit
    host1(config)#traffic-class best-effort
    host1(config-traffic-class)#exit
  2. Create a parameter definition.
    1. Configure the QoS parameter name and the application.
      host1(config)#qos-parameter-define shaping-mode application qos-cell-mode
    2. Configure a controlled-interface type.
      host1(config-qos-parameter-define)#controlled-interface-type vlan
      host1(config-qos-parameter-define)#controlled-interface-type ip
    3. Configure an instance-interface type.
      host1(config-qos-parameter-define)#instance-interface-type vlan
  3. Create the parameter instance and configure the shaping mode.

    When you create the parameter instance and configure the shaping mode, the value of frame shaping mode is 0; the value for cell shaping mode is 1.

    host1(config)#interface gigabitEthernet 6/0/2
    host1(config-if)#encapsulation vlan
    host1(config-if)#interface gigabitEthernet 6/0/2.1
    host1(config-if)#vlan id 1
    host1(config-if)#qos-parameter cell-mode 1
    host1(config-if)#ip address 6.10.10.10 255.255.255.255
    host1(config-if)#exit
    host1(config)#interface gigabitEthernet 6/0/2
    host1(config-if)#svlan 1 qos-parameter cell-mode 1
    host1(config-if)#exit
    host1(config)#interface gigabitEthernet 6/0/2
    host1(config-if)#qos-parameter cell-mode 1

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.