[Contents] [Prev] [Next] [Index] [Report an Error]

Platform Considerations

For information about the modules supported on E-series routers:

See the ERX Module Guide for modules supported on ERX-7xx models, ERX-14xx models, and the ERX-310 router.
See the E120 and E320 Module Guide for modules supported on the E120 router and the E320 router.

Interface Specifiers

The configuration task examples in this chapter use the slot/port format to specify an interface. However, the interface specifier format that you use depends on the router that you are using.

For ERX-7xx models, ERX-14xx models, and ERX-310 routers, use the slot/port format. For example, the following command specifies an ATM interface on slot 0, port 1 of an ERX-7xx model, ERX-14xx model, or ERX-310 router.



host1(config)#interface atm 0/1

For E120 and E320 routers, use the slot/adapter/port format, which includes an identifier for the bay in which the I/O adapter (IOA) resides. In the software, adapter 0 identifies the right IOA bay (E120 router) and the upper IOA bay (E320 router); adapter 1 identifies the left IOA bay (E120 router) and the lower IOA bay (E320 router). For example, the following command specifies an ATM interface on slot 5, adapter 0, port 0 of an E320 router.



host1(config)#interface atm 5/0/0

For more information about supported interface types and specifiers on E-series routers, see Interface Types and Specifiers.

[Contents] [Prev] [Next] [Index] [Report an Error]