Display information about the QoS configuration for a specific Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet interface.
To display the QoS configuration for a Fast Ethernet interface:
host1#show interfaces fastEthernet 6/0 GigEthernet6/0 is Up, Administrative status is Up Hardware is Intel 21440, address is 0090.1a40.5508 MAU is 100BASE-TX MTU: Operational 1522, Administrative 1522 Duplex Mode: Operational Full Duplex, Administrative Auto Negotiate Speed: Operational 100 Mbps, Administrative Auto Negotiate 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec In: Bytes 0, Unicast 0 Multicast 0, Broadcast 0 Errors 0, Discards 0, Mac Errors 0, Alignment 0 CRC 0, Too Longs 0, Symbol Errors 0 Out: Bytes 64, Unicast 0 Multicast 0, Broadcast 1 Errors 0, Discards 0, Mac Errors 0, Deferred 0, No Carrier 0 Collisions: Single 0, Multiple 0, Late 0, Excessive 0 Administrative qos-shaping-mode: cell Operational qos-shaping-mode: cell Attached QoS profile: ss
To display the QoS configuration for a Gigabit Ethernet interface:
host1#show interfaces gigabitEthernet 2/0
To display the QoS configuration for a 10-Gigabit Ethernet interface:
host1#show interfaces tenGigabitEthernet 5/0/0
Table 52 lists the related show interfaces command output fields.
Table 52: show interfaces Output Fields