[Contents] [Prev] [Next] [Index] [Report an Error]

Using Policy Rules to Provide Routing Solutions

The next-interface, next-hop, filter, and forward rules provide routing solutions for traffic matching a classifier. A classifier can have only one action that provides a routing solution.

If you configure two routing solution rules, such as filter and forward, in the same classifier group, the router displays a warning message, and the rule configured last replaces the previous rule.

For IP policy lists, policy rules are available to enable you to make a forwarding decision that includes the next interface and next hop:

For example, you can route packets arriving at IP interface ATM 0/0.0 so that they area handled as indicated:

To configure this routing policy, issue the following commands:

host1(config)#ip classifier-list claclA ip host 1.1.1.1 any
host1(config)#ip classifier-list claclB ip host 2.2.2.2 any
host1(config)#ip policy-list IpPolicy100
host1(config-policy-list)#classifier-group claclA
host1(config-policy-list-classifier-group)#forward interface atm 0/0.1
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#classifier-group claclB
host1(config-policy-list-classifier-group)#forward interface atm 2/1.1
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#classifier-group *
host1(config-policy-list-classifier-group)#filter
host1(config-policy-list-classifier-group)#exit
host1(config)#interface atm 0/0.0
host1(config-subif)#ip policy input IpPolicy100 statistics enabled

[Contents] [Prev] [Next] [Index] [Report an Error]