Enabling PIM on a VR

By default, PIM is disabled. To enable PIM on a VR:

1. Enable multicast routing. (See Enabling IP Multicast.)
2. Create a VR, or access an existing VR context.

   host1(config)#virtual-router boston
   

3. Create and enable PIM processing.

   host1:boston(config)#router pim

router pim

• Use to create and enable PIM processing on a VR or to access Router Configuration mode.
• Example

  host1:boston(config)#router pim

• Use the no version to remove PIM from the VR.
• See router pim.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.