bgpRoutes

[Contents] [Prev] [Next] [Index] [Report an Error]

Description

BGP routing table updates

Emergency

None

Alert

None

Critical

None

Error

None

Warning Log

Failure to add, remove, or modify BGP route in IP forwarding table

Notice Log

BGP route added to, removed from, or modified in the IP forwarding table; aggregate route added to, removed from, or modified in Loc-RIB; network route added to, removed from, or modified in Loc-RIB; best route for internal peers for a given prefix became available; best route for internal peers for a given prefix is no longer available, has changed, or has become available; best route for external peers for a given prefix is no longer available, has changed, or has become available; MPLS base tunnel used to reach an indirect next-hop came up or went down; MPLS stacked tunnel for label came up; indirect next-hop became reachable or unreachable; direct next-hop for an indirect next-hop changed; MPLS tunnel for Inter-AS label came up or went down; route added to L2VPN instance; route deleted from L2VPN instance; route modified for L2VPN instance; -VE device for multihomed local layer 2 site 1 changed from peer to peer2

Info

None

Debug

Redistributed route added to, removed from, or modified in Loc-RIB; advertisement for a given prefix received; withdraw for a given prefix received; local route-target-filtering route added to or removed from prefix in addressFamily

Filter 1

access-class accessClassName [ route-map routeMapName routeMapOptions | filtering-router filteringRouterName filteringRouterOptions | in | out ]

access-class—Logs events for traffic that matches a specific access class
accessClassName —Name of the access class for which you want to log events
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
routeMapOptions—In the following format—filtering-router filteringRouterName filteringRouterOptions | in | out
filtering-router—Logs events only if the access class or route map are defined on a specific virtual router
filteringRouterName—Virtual router where the access class or route map or both are defined
filteringRouterOptions—in | out
in—Matches on traffic coming into the access class, route map, or virtual router
out—Matches on traffic sent out of the access class, route map, or virtual router

Filter 2

peer—Logs events for traffic that matches a specific peer
peerIpAddress—IP address of the peer for which you want to log events
peerIpv6Address—IPv6 address of the peer for which you want to log events
access-class—Logs events for traffic that matches a specific access class
accessClassName—Name of the access class for which you want to log events
accessClassOptions—In the following format—filtering-router filteringRouterName filteringRouterOptions | in | out
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
routeMapOptions—In the following format—filtering-router filteringRouterName filteringRouterOptions | in | out
filtering-router—Logs events only if the peer, access class or route map are defined on a specific virtual router
filteringRouterName—Virtual router where the peer, access class or route map or both are defined
filteringRouterOptions—in | out
in—Matches on traffic coming into the peer, access class, route map, or virtual router
out—Matches on traffic sent out of the peer, access class, route map, or virtual router

Filter 3

route-map routeMapName
[ filtering-router filteringRouterName filteringRouterOptions | in | out ]

route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
filtering-router—Logs events only if the route map is defined on a specific virtual router
filteringRouterName—Virtual router where the route map is defined
filteringRouterOptions—in | out
in—Matches on traffic coming into the route map or virtual router
out—Matches on traffic sent out of the route map or virtual router

Filter 4

router—Logs events for traffic on a specific virtual router
virtualRouterName—Name of virtual router
access-class—Logs events for traffic that matches a specific access class on the specified router
accessClassName—Name of the access class for which you want to log events
accessClassOptions—In the following format—route-map routeMapName routeMapOptions | virtual-router virtualRouterName virtualRouterOptions | in | out
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
routeMapOptions—In the following format—virtual-router virtualRouterName virtualRouterOptions | in | out
filtering-router—Logs events only if the access class or route map is defined on a specific virtual router
filteringRouterName—Virtual router where the access class or route map is defined
filteringRouterOptions—In the following format—in | out
peer—Logs events for traffic that matches a specific peer
peerIpAddress—Address of the peer for which you want to log events
peerOptions—In the following format—access-class accessClassName accessClassOptions | filtering-router filteringRouterName filteringRouterOptions | route-map routeMapName routeMapOptions | in | out
in—Matches on traffic coming into the virtual router, access class, or route map
out—Matches on traffic sent out of the virtual router, access class, or route map

Filter 5

in—Matches on traffic coming into the router

Filter 6

out—Matches on traffic going out of the router

[Contents] [Prev] [Next] [Index] [Report an Error]