Configuring Multilink PPP

This chapter describes how to configure a Multilink Point-to-Point Protocol (PPP) interface on E-series routers.

This chapter contains the following sections:

• Overview
• Platform Considerations
• References
• Supported MLPPP Features
• Unsupported MLPPP Features
• Before You Configure Static MLPPP
• Configuring Static MLPPP
• Configuring Dynamic MLPPP
• Configuring MLPPP Fragmentation and Reassembly
• Monitoring MLPPP

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.