Clearing Dynamic Translations

Use the clear ip nat translation command to clear dynamic translations from the NAT translation table. You can remove all dynamic translations from the translation table or restrict the removal of translation entries based on the protocol, address, or port values.

clear ip nat translation

• Use to clear dynamic translations from the NAT translation table.
• Use an asterisk (*) in the clear ip nat translation version of this command to clear all dynamic translations from the translation table.
• Use an asterisk (*) in the clear ip nat translation { gre | icmp | tcp | udp } inside insideGlobalIpAddress * insideLocalIpAddress * version of this command to match any global or local port and remove inside source extended GRE, ICMP, TCP, or UDP translations for the specified global IP address and local IP address.
• Example 1—Clear all dynamic translations

  host1 #clear ip nat translation*

• Example 2—Clear a specific port translation

  host1 #clear ip nat translation tcp inside 171.69.68.10 10.1.2.3 55

• There is no no version.
• See clear ip nat translation.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.