Configuring Proxy Neighbor Advertisements

Much like proxy ARP, proxy Neighbor Discovery is a means by which one interface responds to a Neighbor Discovery query on behalf of another interface.

To configure proxy Neighbor Discovery:

1. Access an IPv6 interface.

   host1(config)#interface fastEthernet 0/0

   host1(config-if)#

2. Enable Neighbor Discovery on the current interface.

   host1(config)#ipv6 nd

   Note: This command is redundant when configuring Neighbor Discovery over Ethernet, because neighbor solicitations and advertisements are automatically sent on Ethernet interfaces.

3. Enable IPv6 neighbor proxy.

   host1(config-if)#ipv6 nd proxy

ipv6 nd proxy

• Use to enable or disable Neighbor Discovery proxy.

• Example

  host1(config-if)#ipv6 nd proxy

• Use the no version of this command to disable Neighbor Discovery proxy.
• See ipv6 nd proxy

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.