Clearing IPv6 Routes

To clear dynamic IPv6 routes from the routing table, use the clear ipv6 routes command. To clear the routes for a specific IPv6 network, specify the IPv6 prefix. To clear all dynamic IPv6 routes, using the * (asterisk) option.

clear ipv6 routes

• Use to clear IPv6 routes.
• To clear routes in a specific IPv6 network, specify an IPv6 prefix.
• To clear all dynamic IPv6 routes, use the * (asterisk) option.
• Example

  host1(config)#clear ipv6 routes *

• There is no no version.
• See clear ipv6 routes

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.