[Contents] [Prev] [Next] [Index] [Report an Error]

Before You Configure IP

Before you configure IP, created lower-layer interfaces over which IP traffic flows.

For example, to configure an ATM interface:



host1(config)#interface atm 1/0 

host1(config-if)#atm sonet stm-1 

host1(config-if)#no loopback 

host1(config-if)#atm clock internal chassis 

host1(config-if)#interface atm 1/0.10 

host1(config-if)#atm pvc 10 0 20 aal5snap

Refer to the appropriate chapters for information about configuring a specific type of interface.

Note: If you choose to configure VRRP, we recommend that you complete all IP address configurations before you configure VRRP. See Configuring VRRP in the JUNOSe IP Services Configuration Guide, for additional information.

[Contents] [Prev] [Next] [Index] [Report an Error]