Setting the Baseline for MPLS Statistics

You can use the baseline mpls commands to set a statistics baseline for MPLS operations. The router implements the baseline by setting the statistics to zero and then subtracting this baseline when you retrieve baseline-relative statistics.

Use the delta keyword with the show mpls commands to display baselined statistics.

Tasks to set a baseline for MPLS statistics are:

• Setting a Baseline for MPLS Major Interface Statistics
• Enabling and Setting a Baseline for MPLS Forwarding Table Statistics
• Enabling and Setting a Baseline for MPLS Next-Hop Table Statistics
• Setting a Baseline for MPLS Tunnel Statistics
• Enabling Statistics Collection for Policies Attached to MPLS Tunnels

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.