Configuring VPLS

This chapter describes how to configure the virtual private LAN service (VPLS) on the router, and contains the following sections:

• Before You Configure VPLS
• Configuration Tasks for VPLS with BGP Signaling
• Configuring VPLS Instances with BGP Signaling
• Configuring BGP Multihoming for VPLS
• Configuring Optional Attributes for VPLS Instances
• Configuring VPLS Network Interfaces
• Configuring Subscriber Policies for VPLS Network Interfaces
• Configuring the Loopback Interface and Router ID for VPLS
• Configuring MPLS LSPs for VPLS
• Configuring BGP Signaling for VPLS
• VPLS Configuration Example with BGP Signaling
• Configuration Tasks for VPLS with LDP Signaling
• Configuring VPLS Instances with LDP Signaling
• Configuring LDP Signaling for VPLS
• Configuring Routing in the Core Network for VPLS
• VPLS Configuration Example with LDP Signaling

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.