Clearing Dynamic MAC Addresses from the VPLS Forwarding Table

You can use the following clear commands to remove all dynamic (learned) MAC address entries or a specific dynamic MAC address entry from the forwarding table for a VPLS instance.

Tasks to clear the VPLS forwarding table are:

•  Clearing All Dynamic MAC Addresses from the VPLS Forwarding Table
•  Clearing a Specific Dynamic MAC Address from the VPLS Forwarding Table
•  Clearing All Dynamic MAC Addresses for a Network Interface Associated with a VPLS Instance from the VPLS Forwarding Table
•  Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface Associated with A VPLS Instance

Clearing All Dynamic MAC Addresses from the VPLS Forwarding Table

To clear all dynamic MAC address entries for the VPLS instance:

• Issue the clear bridge command.

  host1#clear bridge vplsB

There is no no version.

Clearing a Specific Dynamic MAC Address from the VPLS Forwarding Table

To clear a specific dynamic MAC address entry for the VPLS instance:

• Issue the clear bridge address command.

  host1#clear bridge vplsB address 0090.1a40.9992

There is no no version.

Clearing All Dynamic MAC Addresses for a Network Interface Associated with a VPLS Instance from the VPLS Forwarding Table

To clear all dynamic MAC address entries for a network interface associated with a VPLS instance:

• Issue the clear bridge interface command.

  host1#clear bridge interface atm 3/3.2

There is no no version.

Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface Associated with A VPLS Instance

To clear all dynamic MAC address entries for the VPLS virtual core interface associated with a VPLS instance:

• Issue the clear bridge interface vpls command.

  host1#clear bridge interface vpls vplsA

There is no no version.

Related Topics

• clear bridge command
• clear bridge address command
• clear bridge interface command
• clear bridge interface vpls command

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.