[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
isis circuit-type
Syntax
isis circuit-type [ level-1 | level-1-2 | level-2-only
]
no isis circuit-type
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Configures the type of adjacency desired for the
specified interface. The no version resets
the circuit type to level 1 and level 2.
Options
- level-1—Establishes a level 1 adjacency if there
is at least one area address in common between this router and its
neighbors
- level-1-2—(default) Establishes a level 1 and 2
adjacency if the neighbor is also configured as a level 1-2 router
and there is at least one area in common. If there is no area in common,
a level 2 adjacency is established.
- level-2-only—Establishes a level 2 adjacency on
the circuit. If the neighboring router is a level 1 only router, no
adjacency will be established.
Interface Configuration, Subinterface Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
