[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ipv6 prefix-list
Syntax
ipv6 prefix-list listName { description desc | { [ seq sequence ] { permit
| deny } ipv6Prefix [ ge geNumber ] [ le leNumber ] } }
no ipv6 prefix-list listName [ description
| [ seq sequence ] [ { permit | deny } ipv6Prefix [ ge geNumber ] [ le leNumber ] ] ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Creates an IPv6 prefix list for route filtering;
specifies a list entry—a permit or deny clause for a network
address. The no version removes the specified
prefix list or the specified list entry.
Options
-
listName—Name of the IPv6
prefix list; a string of up to 32 characters
-
desc—Description of the prefix
list
- sequence—Number in the range 0–65535 that
indicates the position the prefix list entry has in the already existing
list of entries for the prefix list; if you do not specify a sequence, the command uses the value of the last sequence
number + 5
- permit—When specified, the router redistributes
any prefix that matches the filtered route based on the set actions
- deny—When specified, the router drops any prefix
that matches the filtered route
-
ipv6Prefix—Network route that
you want to filter, in the format ipv6Address / length, where
-
ipv6Address—Base IPv6 address
of the network route that you want to filter (for example, ::ffff:a:b:c:d)
-
length—Length of the network
prefix; number of bits masking base address to produce address to
be matched
-
geNumber—Route being filtered
matches if its prefix is within the range specified: greater than
or equal to geNumber and less than or equal to
32
-
leNumber—Route being filtered
matches if its prefix is within the range specified: greater than
or equal to length and less than or equal to leNumber
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
