[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ipv6 ospf bfd-liveness-detection
Syntax
ipv6 ospf bfd-liveness-detection [ minimum-interval minInterval |
[ minimum-receive-interval minRecInterval ]
[ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ]
no ipv6 ospf bfd-liveness-detection
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Enables BFD (bidirectional forwarding detection)
on an interface running OSPFv3 and defines BFD values to be negotiated
between OSPFv3 neighbors for detection of IPv6 data path failures.
The no version disables BFD on the OSPFv3
interface.
 |
Note:
BFD sessions might not be maintained when the multiplier
value is 1 and configured intervals are very short. We recommend that
you do not use a multiplier value of 1 with very short intervals.
|
Options
-
minInterval—Minimum proposed
transmit interval and required receive interval for BFD control packets;
has the same effect as configuring the minimum receive interval and
the minimum transmit interval to the same value; number in the range
100–65535 milliseconds—for ES2 4G LM only, the range is
10–65535 milliseconds; default value is 300 milliseconds
-
minRecInterval—Minimum interval
at which the local peer must receive BFD control packets sent by the
remote peer; number in the range 100–65535 milliseconds—for
ES2 4G LM only, the range is 10–65535 milliseconds; default
value is 300 milliseconds
-
minTransInterval—Minimum proposed
interval between BFD control packets sent by the local peer; number
in the range 100–65535 milliseconds—for ES2 4G LM only,
the range is 10–65535 milliseconds; default value is 300 milliseconds
-
multValue—Detection multiplier
value that the remote peer router multiplies by the local peer's
negotiated transmit interval to determine the remote peer's BFD
liveness detection interval; equal to the number of BFD packets that
can be missed before the BFD session is declared down; number in the
range 1–255; default value is 3
Interface Configuration, Subinterface Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
