[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
ip address
Syntax
ip address ipAddress ipMask [ secondary ]
no ip address [ ipAddress ipMask [ secondary
] ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets a primary or secondary IP address for an interface
or subinterface. The no version removes
an IP address or disables IP processing. You must specify the layer
2 encapsulation before you can set the IP address.
Options
-
ipAddress—IP address in 32-bit
dotted decimal format (for example, 192.56.32.2)
-
ipMask—mask for associated
IP subnet in dotted decimal or prefix length notation
- secondary—Specifies that the configured address
is a secondary IP address; if omitted, the configured address is the
primary IP address
Interface Configuration, Profile Configuration, Subinterface
Configuration
Related Topics
-
Configuring Local ATM Cross-Connects with AAL5
Encapsulation, Configuring Local Cross-Connects
Between Ethernet/VLAN Interfaces, Configuring
the Loopback Interface and Router ID for BGP for L2VPNs, Configuring the Loopback Interface and Router ID for
VPLS, and Configuring MPLS LSPs for L2VPNs in the JUNOSe BGP and MPLS Configuration Guide
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
