[Contents] [Prev] [Next] [Index] [Report an Error]

framing

Syntax

framing framingType

no framing

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Specifies the framing mode used by E3 or T3 interfaces. Available modes vary by the type of interface. The no version restores the default for that interface.

Options

framingType—One of the following framing types:
E3 Frame
- g751—Default; G.751 compliant frame
- g832—G.832 compliant frame
T3
- c-bit—Default; specifies c-bit parity framing
- m23—Specifies M23 multiplexer framing

Controller Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]