distribute-list

Syntax

In Router Configuration mode:

[ no ] distribute-list accessListName { in | out } [ interfaceType interfaceSpecifier ]

In Remote Neighbor Configuration mode:

[ no ] distribute-list accessListName { in | out }

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Specifies the distribute list, an access list applied to incoming or outgoing RIP route updates. In Remote Neighbor Configuration mode, applies only to a RIP remote-neighbor interface. The no version removes the distribute list. An IP access list acts as a filter; refer to the access-list command for details.

Options

• accessListName—Name of the access list; string of up to 32 alphanumeric characters
• in—Applies the access list to incoming route updates
• out—Applies the access list to outgoing route updates
• interfaceType—Interface type; see Interface Types and Specifiers
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers

Address Family Configuration, Remote Neighbor Configuration, Router Configuration

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.