 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
convergence-factor convergenceFactor
no convergence-factor
Command introduced in JUNOSe Release 8.0.0.
Specifies the convergence factor for all simple shared shapers on the router. The convergence factor determines how quickly the dynamic shaping rate converges with the calculated dynamic shaping rate, and is expressed as a percentage of the available bandwidth. The no version removes the specified convergence factor from all simple shared shapers on the router.
QoS Shared Shaper Control Configuration
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |