 |
Note: For information about the maximum number of learned MAC address entries combined for all bridge groups and VPLS instances supported per chassis, see JUNOSe Release Notes, Appendix A, System Maximums. |
bridge { bridgeGroupName | vplsName } learn addressCount
no bridge { bridgeGroupName | vplsName } learn
Command introduced before JUNOSe Release
7.1.0.
vplsName variable added
in JUNOSe Release 7.1.0.
Sets the maximum number of dynamic MAC addresses that a bridge group or VPLS instance can learn. The no version restores the default value, 0 (zero) learned addresses. The default value implies that there is no maximum number of learned entries for an individual bridge group or VPLS instance; that is, a bridge group or VPLS instance can learn an unlimited number of MAC addresses, up to the maximum number that the router supports.
To enable or disable the ability of a bridge group or VPLS instance to learn dynamic MAC addresses, use the bridge acquire command.
|
Note: For information about the maximum number of learned MAC address entries combined for all bridge groups and VPLS instances supported per chassis, see JUNOSe Release Notes, Appendix A, System Maximums. |
Global Configuration
 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |