[Contents] [Prev] [Next] [Index] [Report an Error]

area range

Syntax

For OSPFv2:

[ no ] area { areaId | areaIdInt } range ipAddress mask [ do-not-advertise ]
[ cost costValue ]

For OSPFV3:

[ no ] area { areaId | areaIdInt } range ipv6Prefix/ipv6PrefixLength
[ do-not-advertise | advertise | cost costValue ]

Release Information

Command introduced before JUNOSe Release 7.1.0.
cost keyword and costValue variable for OSPFv2 added in JUNOSe Release 8.1.0.

Description

Aggregates routes at an area boundary. By default, the range of configured networks is advertised in type 3 (summary) LSAs. The no version disables this function.

Options

areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address to match
mask—IP address mask
ipv6Prefix—IPv6 network number to match
ipv6PrefixLength—Length of the IPv6 prefix; a decimal value that indicates how many of the higher-order contiguous bits of the IPv6 address make up the prefix (the network portion of the IPv6 address). A slash (/) must precede this value.
do-not-advertise—Specifies that the range of configured networks is not advertised
advertise—Specifies that the range of configured networks is advertised (IPv6 only)
costValue—Cost value for the specified range of networks in the range 0–65535

Router Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]