address send version

Syntax

address { ipAddress | unnumbered interfaceType interfaceSpecifier }
send version { 1 | 2 | 1 2 | 2 1 | off }

no address [ ipAddress | unnumbered interfaceType interfaceSpecifier ] send version

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Restricts the RIP version that the router can send on an interface. The no version sets the interface back to the default value, sending only RIP version 1.

Options

• ipAddress—Address of IP interface where RIP will be run
• unnumbered—Specifies that RIP will be run on an unnumbered interface
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• 1—Specifies RIP version 1 only
• 2—Specifies RIP version 2 only
• 1 2—Specifies RIP version 1 and version 2
• 2 1—Specifies RIP version 2 and version 1
• off—Turns reception off

Address Family Configuration, Router Configuration

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.