address passive-interface

Syntax

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } passive-interface

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Disables the transmission of routing updates on an interface. OSPF routing information is neither sent nor received through the specified router interface. The specified interface address appears as a stub network in the OSPF domain. The no version reenables the transmission of routing updates.

Note: You must issue the address area command before issuing this command.

Options

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers

Router Configuration

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.