address network

Syntax

address { ipAddress | unnumbered interfaceType interfaceSpecifier }
network { broadcast | non-broadcast | point-to-point }

no address { ipAddress | unnumbered interfaceType interfaceSpecifier } network

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Configures the OSPF network type for the specified interface to something other than the default for the network medium. The no version restores the default value for the medium.

Note: You must issue the address area command before issuing this command.

Options

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• broadcast—Sets network type to broadcast
• non-broadcast—Sets network type to NBMA
• point-to-point—Sets network type to point-to-point

Router Configuration

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.