[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Monitoring Detailed Configuration Information for Specified
Destinations
Purpose
Display detailed configuration information about specified destinations.
Action
To display detailed configuration information about specified
destinations:
To display information about a specific destination:
host1#show l2tp destination ip 172.31.1.98
L2TP destination 1 is Up with 5 active tunnels and 64 active sessions
To display information about all destinations:
host1#show l2tp destination detail 1
L2TP destination 1 is Up with 5 active tunnels and 64 active sessions
Configuration
Administrative state is enabled
SNMP traps are enabled
Destination address
Transport ipUdp
Virtual router default
Local address 192.168.1.230, peer address 172.31.1.98
Destination status
Effective administrative state is enabled
Sub-interfaces total active failed auth-errors
Tunnels 5 5 0 0
Sessions 64 64 0 n/a
Statistics packets octets discards errors
Control rx 69 3251 2 0
Control tx 195 23939 0 0
Data rx 68383456 68383456 0 0
Data tx 68383456 68383456 0 0
Meaning
Table 81 lists the show
l2tp destination command output fields.
Table 81: show l2tp
destination Output Fields
|
Field Name
|
Field Description
|
|
Configuration
|
Configured status of the destination
|
|
Administrative state
|
Administrative status of the destination:
- enabled—No restrictions on creation and operation
of sessions and tunnels for this destination
- disabled—Router disabled existing sessions and tunnels
and will not create new sessions or tunnels for this destination
- drain—Router will not create new sessions or tunnels
for this destination
|
|
SNMP traps
|
Whether or not the router sends traps to SNMP for operational
state changes
|
|
Destination address
|
Address information for the specified destination
|
|
Transport
|
Method used to transfer traffic
|
|
Virtual
|
Name of the virtual router on which the tunnel is configured
|
|
Local and peer addresses
|
Addresses of the local and remote interfaces
|
|
Destination status
|
Effective administrative state—The more restrictive
of the router and destination administrative states. This setting,
rather than the administrative state of the destination, determines
whether the router can create new sessions or tunnels and whether
the sessions or tunnels are disabled for this destination.
|
|
Sub-interfaces
|
Sub-interface information about the L2TP destination
|
|
total
|
Number of sessions or tunnels that the router created
for this destination
|
|
active
|
Number of operational sessions or tunnels for this destination
|
|
failed
|
Number of requests that did not reach an operational
state for this destination
|
|
auth-errors
|
Number of requests that failed because the tunnel password
was invalid for this destination
|
|
Statistics
|
Information about the traffic sent and received
|
Related Topics
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
