[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring RADIUS-Initiated Change of Authorization
To configure the RADIUS dynamic-request change
of authorization feature, perform the following steps to set up the
RADIUS dynamic-request server that will perform the CoA operation:
- Configure the RADIUS dynamic-request server, and enter
RADIUS Configuration mode.
- host1(config)#radius dynamic-request server
10.10.5.10
- Enable the CoA capability on the RADIUS dynamic-request
server.
- host1(config-radius)#authorization change
- Define the key (secret) used in the RADIUS Authenticator
field during exchanges between the RADIUS dynamic-request server and
the RADIUS server.
- host1(config-radius)#key Secret21Clientkey
- (Optional) Specify the UDP port on which the router listens
for messages from the RADIUS server. The default is 1700.
- host1(config-radius)#udp-port 1770
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
