[Contents] [Prev] [Next] [Index] [Report an Error]

Monitoring Mapping Between User Domains and Virtual Routers

Purpose

Display the mapping between user domains and virtual routers.

The following keywords have significance when used as user domains:

none—All client requests with no user domain name are associated with the virtual router mapped to the none entry
default—All client requests with a domain present that have no map are associated with the virtual router mapped to the default entry

Action

To display the mapping between user domains and virtual routers:

host1#show aaa domain-map
Domain: lac-tunnel; router-name: lac; ipv6-router-name: default
Tunnel                 Tunnel   Tunnel   Tunnel    Tunnel
 Tag     Tunnel Peer   Source    Type    Medium   Password    Tunnel Id
------   -----------   ------   ------   ------   --------   -----------
5        192.168.1.1   <null>   l2tp     ipv4     welcome    lac-tunnel

                       Tunnel                 Tunnel
Tunnel     Tunnel      Server     Tunnel       Max
 Tag     Client Name    Name    Preference   Sessions     Tunnel RWS
------   -----------   ------   ----------   --------   --------------
5        lac           boston   5            0          4

                                                 Tunnel
         Tunnel     Tunnel            Tunnel       Tx
Tunnel   Virtual   Failover           Switch     Speed
 Tag     Router     Resync           Profile     Method
------   -------   --------         ---------    ------
5        <null>    silent failover   denver      qos

Meaning

Table 13 lists the show aaa domain-map command output fields.

Table 13: show aaa domain-map Output Fields

Field Name	Field Description
Domain	Name of the domain
router-name	Virtual router to which user domain name is mapped
tunnel-group	Name of the tunnel group assigned to the domain map
ipv6-router-name	IPv6 virtual router to which user domain name is mapped
local-interface	Interface information to use on the local (E-series) side of the subscriber’s interface
ipv6-local-interface	IPv6 interface information to use on the local (E-series) side of the subscriber’s interface
poolname	Local address pool from which the router allocates addresses for this domain
IP hint	IP hint is enabled
strip-domain	Strip domain is enabled
override-username	Single username used for all users from a domain in place of the values received from the remote client
override-password	Single password used for all users from a domain in place of the values received from the remote client
Tunnel Tag	Tag that identifies the tunnel
Tunnel Peer	Destination address of the tunnel
Tunnel Source	Source address of the tunnel
Tunnel Type	L2TP
Tunnel Medium	Type of medium for the tunnel; only IPv4 is supported
Tunnel Password	Password for the tunnel
Tunnel Id	ID of the tunnel
Tunnel Client Name	Host name that the LAC sends to the LNS when communicating to the LNS about the tunnel
Tunnel Server Name	Host name expected from the peer (the LNS) when during tunnel startup
Tunnel Preference	Preference level for the tunnel
Tunnel Max Sessions	Maximum number of sessions allowed on a tunnel
Tunnel RWS	L2TP receive window size (RWS) for a tunnel on the LAC; displays either the configured value or the default behavior, which is indicated by system chooses
Tunnel Virtual Router	Name of the virtual router to map to the user domain name
Tunnel Failover Resync	L2TP peer resynchronization method
Tunnel Switch Profile	Name of the L2TP tunnel switch profile
Tunnel Tx Speed Method	Method that the router uses to calculate the transmit connect speed of the subscriber’s access interface: static layer2, dynamic layer2, qos, actual, not set

Monitoring Mapping Between User Domains and Virtual Routers

Purpose

Action

Meaning

Related Topics