[Contents] [Prev] [Next] [Report an Error]

OC3/STM1 POS Multimode Without APS/MSP Redundancy Module Combination

Line module label OCx/STMx POS

I/O module label OC3-4 I/O
MULTI MODE

Number of I/O ports

4

Software release

First supported: 2.0.0

Final supported: Not applicable

Description

120 W

Unchannelized, concatenated OC3/STM1 for POS

Type

EFA ASIC

Capability

OC3/STM1

HDLC framing

Software features

See OCx/STMx POS and OC48 Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

1:N redundancy

NOTE: Line module redundancy is not supported on the ERX-310 router.

Cables and connectors

SC full duplex

Tx power:

min: –19 dBm

max: –14 dBm

Center wavelength: 1310 nm

Rx input power:

min: –30 dBm

max: –14 dBm

Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.

[Contents] [Prev] [Next] [Report an Error]

Line module label	OCx/STMx POS
I/O module label	OC3-4 I/O MULTI MODE
Number of I/O ports	4
Software release	First supported: 2.0.0 Final supported: Not applicable
Description	120 W Unchannelized, concatenated OC3/STM1 for POS
Type	EFA ASIC
Capability	OC3/STM1 HDLC framing
Software features	See OCx/STMx POS and OC48 Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX-310 router.
Cables and connectors	SC full duplex Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.