[Contents] [Prev] [Next] [Report an Error]

FE-8 Module Combination (8 Ports) (256-MB Memory)

Line module label GE/FE

I/O module label FE-8 I/O

Number of I/O ports

8

Software release

First supported: 5.0.0

Final supported: Not applicable

The GE/FE line module must have a minimum of 256 MB of memory to be used with JUNOSe Release 5.3.0 or a higher-numbered release.

Description

130 W

Fast Ethernet

Type

EFA ASIC

Capability

IEEE 802.3 standards compliance

10/100Base-T

Software features

See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

Not applicable

Cables and connectors

RJ-45 connectors

For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.

For 100-Mbps operation, use only CAT 5 UTP cable.

The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet).

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

[Contents] [Prev] [Next] [Report an Error]

Line module label	GE/FE
I/O module label	FE-8 I/O
Number of I/O ports	8
Software release	First supported: 5.0.0 Final supported: Not applicable The GE/FE line module must have a minimum of 256 MB of memory to be used with JUNOSe Release 5.3.0 or a higher-numbered release.
Description	130 W Fast Ethernet
Type	EFA ASIC
Capability	IEEE 802.3 standards compliance 10/100Base-T
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	RJ-45 connectors For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable. For 100-Mbps operation, use only CAT 5 UTP cable. The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet). See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.