[Contents] [Prev] [Next] [Report an Error]

cOC12/STM4 Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination

Line module label cOCx/STMx F0

I/O module label COC12 F0 APS
SINGLE MODE

Number of I/O ports

2

1 active, 1 redundant

Software release

First supported: 6.1.3 or later 6.1.x release, 7.0.2 or later 7.0.x release, 7.2.0 and higher-numbered release

Description

130 W

OC12/STM4 channelized to DS3, DS1, E1, and DS0

Type

EFA ASIC

Capability

OC12/STM4

OC3/STM1

DS3, DS1

T1, E1

DS0

HDLC framing

Software features

See Channelized OCx/STMx Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

1:N redundancy

NOTE: Line module redundancy is not supported on the ERX-310 router.

Cables and connectors

SC full duplex connector

Tx power:

min: –15 dBm

max: –8 dBm

Center wavelength: 1310 nm

Rx input power:

min: –31 dBm

max: –7 dBm

Rated for 15 km (9.3 miles) of 9-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 4, Configuring Channelized OCx/STMx Interfaces.

[Contents] [Prev] [Next] [Report an Error]

Line module label	cOCx/STMx F0
I/O module label	COC12 F0 APS SINGLE MODE
Number of I/O ports	2 1 active, 1 redundant
Software release	First supported: 6.1.3 or later 6.1.x release, 7.0.2 or later 7.0.x release, 7.2.0 and higher-numbered release
Description	130 W OC12/STM4 channelized to DS3, DS1, E1, and DS0
Type	EFA ASIC
Capability	OC12/STM4 OC3/STM1 DS3, DS1 T1, E1 DS0 HDLC framing
Software features	See Channelized OCx/STMx Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX-310 router.
Cables and connectors	SC full duplex connector Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –7 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 4, Configuring Channelized OCx/STMx Interfaces.