[Contents] [Prev] [Next] [Report an Error]

CT1 Module Combination

Line module label CT1

I/O module label CT1 FULL I/O

Number of I/O ports

24

Software release

First supported: 1.1.0

Final supported: 7.3.x

Description

40 W

Channelized T1

Type

Non-ASIC

Capability

DS1, DS0

HDLC Framing

Software features

See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-1410 router

SRP module compatibility

SRP-5G

SRP-5G+

SRP-10G

Module redundancy support

1:N redundancy

Cables and connectors

RJ-48C 100–ohm connector

Use shielded cables to maintain EMC compliance.

The line interface unit supports multiple line buildouts.

Signal strength is software controlled.

The transmitted signal complies with ANSI T1.102-1993 Digital Hierarchy - Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet).

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See ERX Module Guide, Appendix B, Module LEDs.

Alarms, errors, and events

See Monitoring Interfaces in the Configuring Channelized T1 and Channelized E1 Interfaces chapter of the JUNOSe Physical Layer Configuration Guide for Release 8.0.x and earlier.

[Contents] [Prev] [Next] [Report an Error]

Line module label	CT1
I/O module label	CT1 FULL I/O
Number of I/O ports	24
Software release	First supported: 1.1.0 Final supported: 7.3.x
Description	40 W Channelized T1
Type	Non-ASIC
Capability	DS1, DS0 HDLC Framing
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-1410 router
SRP module compatibility	SRP-5G SRP-5G+ SRP-10G
Module redundancy support	1:N redundancy
Cables and connectors	RJ-48C 100–ohm connector Use shielded cables to maintain EMC compliance. The line interface unit supports multiple line buildouts. Signal strength is software controlled. The transmitted signal complies with ANSI T1.102-1993 Digital Hierarchy - Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet). See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Interfaces in the Configuring Channelized T1 and Channelized E1 Interfaces chapter of the JUNOSe Physical Layer Configuration Guide for Release 8.0.x and earlier.