JUNOSe 9.1.x Quality of Service Configuration Guide > Configuring Rates and Weights in the Scheduler Hierarchy > Configuring the HRR Weight for a Scheduler Node or Queue

Configuring the HRR Weight for a Scheduler Node or Queue

By default, the HRR weight is configured for the scheduler profile. You can set a specific HRR weight of the scheduler node or queue. The weight value is used when no assured rate is set.

To configure a static weight:

1. Create a scheduler profile.

host1(config)#scheduler-profile relative

host1(config-scheduler-profile)#

2. Specify the weight value.

host1(config-scheduler-profile)#weight 10

host1(config-scheduler-profile)#weight 800 - 200

The weight value is in the range 0–4080. The default weight is 8. Weight 0 (zero) is a special weight that is used for relative strict-priority scheduling.

Use the operator and operandValue variables to configure a weight with an expression.

Related Topics

• Static and Hierarchical Assured Rate Overview
• For more information about specifying an expression that you can reference within a scheduler profile, see Using Expressions for Bandwidth and Burst Values in a Scheduler Profile
• Relative Strict-Priority Scheduling Overview
• scheduler-profile command
• weight command