JUNOSe 9.1.x Quality of Service Configuration Guide > Configuring the Shaping Mode for Ethernet with QoS Parameters > Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode

Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode

To associate a parameter instance with the QoS cell mode application:

1. Configure traffic classes.

host1(config)#traffic-class voice

host1(config-traffic-class)#exit

host1(config)#traffic-class best-effort

host1(config-traffic-class)#exit

2. Create a parameter definition.

1. Configure the QoS parameter name and the application.

host1(config)#qos-parameter-define shaping-mode application qos-cell-mode

2. Configure a controlled-interface type.

host1(config-qos-parameter-define)#controlled-interface-type vlan

host1(config-qos-parameter-define)#controlled-interface-type ip

3. Configure an instance-interface type.

host1(config-qos-parameter-define)#instance-interface-type vlan

3. Create the parameter instance and configure the shaping mode.

When you create the parameter instance and configure the shaping mode, the value of frame shaping mode is 0; the value for cell shaping mode is 1.

host1(config)#interface gigabitEthernet 6/0/2

host1(config-if)#encapsulation vlan

host1(config-if)#interface gigabitEthernet 6/0/2.1

host1(config-if)#vlan id 1

host1(config-if)#qos-parameter cell-mode 1

host1(config-if)#ip address 6.10.10.10 255.255.255.255

host1(config-if)#exit

host1(config)#interface gigabitEthernet 6/0/2

host1(config-if)#svlan 1 qos-parameter cell-mode 1

host1(config-if)#exit

host1(config)#interface gigabitEthernet 6/0/2

host1(config-if)#qos-parameter cell-mode 1

Related Topics

• Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode
• Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment for Cell Shaping
• For more information about configuring scheduler rates for QoS parameters, see Scheduler Profiles and Parameter Expressions for QoS Administrators
• For more information about the QoS downstream rate application, see QoS Downstream Rate Application Overview
• controlled-interface-type command
• instance-interface-type command
• interface gigabitEthernet command
• ip address command
• qos-parameter command
• qos-parameter-define command
• scheduler-profile command
• svlan qos-parameter command
• traffic-class command
• vlan id command