JUNOSe 9.1.x Quality of Service Configuration Guide > Configuring Byte Adjustment for Shapng Rates with QoS Parameters > Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic

Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic

You can adjust shaping rates to account for different layer 2 encapsulations as well as the ATM cell pad, header, and trailer on interfaces with cell shaping mode using the qos-byte-adjustment application.

NOTE: When you apply a parameter with the qos-byte-adjustment application to an interface with frame shaping mode, you adjust shaping rates to account for different layer 2 encapsulations only.

To associate a parameter instance with the byte adjustment application:

1. Configure the traffic classes.

host1(config)#traffic-class voice

host1(config-traffic-class)#exit

host1(config)#traffic-class best-effort

host1(config-traffic-class)#exit

2. Create a parameter definition.

1. Configure the QoS parameter name and the application.

host1(config)#qos-parameter-define byteadjust1 application 
qos-byte-adjustment 

2. Configure a controlled-interface type.

host1(config-qos-parameter-define)#controlled-interface-type vlan

host1(config-qos-parameter-define)#controlled-interface-type ip

3. Configure an instance-interface type.

host1(config-qos-parameter-define)#instance-interface-type vlan

3. Do one of the following:

• Configure the shaping mode by issuing the qos-shaping-mode command.

Frame shaping mode is the default for Ethernet interfaces on all E-series routers. You can only set the cell shaping mode for Gigabit Ethernet and 10-Gigabit Ethernet interfaces configured on the GE-2 line module, the GE-HDE line module, and the ES2 4G LM.

• Configure the shaping mode by specifying the QoS cell mode application with a parameter definition.

host1(config)#qos-parameter-define cell-mode application qos-cell-mode

4. Attach the parameter definition to a logical Ethernet interface.

In this example, parameter instances are created for both the byte adjustment and QoS cell mode applications.

host1(config)#interface gigabitEthernet 7/0

host1(config-if)#encapsulation vlan

host1(config-if)#exit

host1(config)#interface gigabitEthernet 7/0.1

host1(config-if)#vlan id 1

host1(config-if)#qos-parameter byteadjustment -16

host1(config-if)#qos-parameter cell-mode 1

host1(config-if)#ip address 1.1.1.1 255.255.255.0

Related Topics

• Byte Adjustment for ADSL and VDSL Traffic Overview
• Guidelines for Configuring Byte Adjustment of Cell and Frame Shaping Rates Using QoS Parameters
• Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment for Cell Shaping
• For information about managing packet fragmentation for traffic with frame shaping mode, see Configuring a Parameter Definition to Adjust Frame Shaping Rates for VDSL Traffic
• For more information about configuring shaping modes for Ethernet, see QoS Shaping Mode for Ethernet Interfaces Overview and Cell Shaping Mode Using QoS Parameters Overview
• controlled-interface-type command
• encapsulation vlan command
• instance-interface-type command
• ip address command
• node command
• qos-parameter command
• qos-parameter-define command
• qos-profile command
• queue command
• traffic-class command
• vlan id command