JUNOSe 9.1.x Policy Management Configuration Guide > Monitoring Policy Management > Monitoring GRE Tunnel Information

Monitoring GRE Tunnel Information

Purpose

Display information about GRE tunnels. The state keyword displays tunnels that are in a specific state: disabled, down, enabled, not-present, or up. The ip keyword to display tunnels associated with an IP address. To display information about a specific tunnel, include the name of the tunnel. To display information about tunnels on a specific virtual router, include the name of the virtual router.

Action

To display information about GRE Tunnel policy lists:

host1#show gre tunnel detail tunnelGre50

GRE tunnel tunnelGre50 is Down

Tunnel operational configuration

  Tunnel mtu is '10240'

  Tunnel source address is '0.0.0.0'

  Tunnel destination address is '0.0.0.0'

  Tunnel transport virtual router is source

  Tunnel checksum option is disabled 

  Tunnel sequence number option is disabled 

  Tunnel up/down trap is enabled 

  Tunnel-server location is 6/0

  Tunnel administrative state is Up

Statistics    packets        octets       discards   errors

  Data rx     0              0            0          0          

  Data tx     0              0            0          0          

GRE tunnel policy input routeGre25

  classifier-group gre6 entry 1

     0 packets, 0 bytes

     traffic-class best-effort 

     mark 4 mask 255

GRE tunnel policy output routeGre35

  classifier-group gre14 entry 1

     0 packets, 0 bytes

     traffic-class best-effort 

     mark 4 mask 255

Meaning

Table 27: show gre tunnel Output Fields

Field Name	Field Description
GRE tunnel policy input	Policy for outbound traffic
GRE tunnel policy output	Policy for inbound traffic
traffic-class	Name of traffic class
classifier-group	Name of classifier group
entry	Identifier for the entry in the classifier group
packets	Number of packets
bytes	Number of bytes
mark	ToS byte setting for the classifier control list
mask	Mask value corresponding to the ToS

Table 27 lists the show gre tunnel command output fields.

Related Topics

• show gre tunnel command