Configuration Example
The following example illustrates how to configure the layers on a channelized T3 interface:
host1(config)#controller t3 0/1host1(config-controll)#no shutdownhost1(config-controll)#framing c-bithost1(config-controll)#clock source internal modulehost1(config-controll)#cablelength 220host1(config-controll)#t1 2 framing esflihost1(config-controll)#t1 2 clock source internalhost1(config-controll)#t1 2 loopback localhost1(config-controll)#t1 2/1 timeslots 1,3-8,10host1(config-controll)#exithost1(config)#interface serial 0/1:2/1host1(config-if)#invert datahost1(config-controll)#exit