Index
A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Numerics
- 10-Gigabit Ethernet interfaces
- modules 1
- specifying an interface 1
- 4xDS3 ATM I/O modules 1
A
- Address Resolution Protocol. See ARP1
- all option (show controllers) 1, 2
- aps commands
- aps events 1
- aps force 1
- aps group 1, 2
- aps lockout 1
- aps manual 1
- aps protect 1
- aps revert 1
- aps unidirectional 1
- aps working 1
- See also show aps commands1
- APS/MSP (Automatic Protect Switching/Multiplex Section Protection)
- automatic switchover 1
- channel numbers 1, 2
- communication methods 1
- configuration example 1
- configuring 1, 2
- events 1
- K1 byte 1
- K2 byte 1
- manual switchover 1, 2
- monitoring 1, 2
- overview 1
- protect interface 1, 2, 3, 4
- reversion after switchover 1
- switching mechanisms 1
- working interface 1, 2, 3, 4
- ARP (Address Resolution Protocol) 1
- audience for documentation 1
- Automatic Protect Switching. See APS/MSP1
B
- baseline commands
- baseline interface 1
- baseline interface serial
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- baseline line interface sonet 1, 2
- baseline path interface sonet 1, 2
- baseline section interface sonet 1, 2
- BERT (bit error rate test) patterns
- channelized T3 interfaces 1, 2, 3
- cOCx/STMx interfaces 1, 2, 3
- E3/T3 interfaces 1, 2
- bert command
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- bit error rate test patterns. See BERT patterns1
C
- cable length
- specifying 1, 2
- cablelength commands
- cablelength 1, 2
- cell scrambling
- E3 1
- T3 1
- channel numbers, APS/MSP interfaces 1, 2
- channel-group commands.See path ds1 | e1 commands1
- channelized OCx/STMx interfaces. See cOCx/STMx interfaces1
- channelized T3 interfaces
- bert command 1
- configuring 1, 2
- configuring HDLC channel 1
- equipment loopback command 1
- loopback command 1
- monitoring parameters 1
- numbering scheme 1, 2
- references 1
- testing 1, 2
- clock commands
- clock source
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces 1, 2
- OCx/STMx interfaces 1
- clock source, selecting
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1
- E1 interfaces on cOCx/STMx 1
- E3/T3 interfaces 1
- OCx/STMx interfaces 1, 2
- T1 interfaces on cOCx/STMx 1
- T3 interfaces on cOCx/STMx 1
- cOCx/STMx interfaces
- configuring HDLC channel 1
- configuring T1/E1 1
- loopback 1, 2
- monitoring 1
- numbering scheme 1
- references 1
- testing 1, 2
- COCX-F3 line modules 1
- configuring. See specific feature, product, or protocol1
- connectivity in SONET/SDH paths 1, 2
- control traffic for high-density Ethernet 1
- controller commands
- controller e3 1
- controller sonet 1, 2
- controller t3 1, 2, 3
- conventions defined
- icons 1
- text and syntax 1
- counters
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- CRC (cyclic redundancy check)
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- crc command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- CT3/T3 12 I/O modules 1
- CT3/T3 12 line modules 1
- CT3/T3 F0 line modules 1
- customer support, contacting 1
- cyclic redundancy check. See CRC1, 2, 3
D
- data stream inversion, enabling
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- dedicated tunnel-server ports
- configuring 1
- overview 1
- supported applications 1
- supported modules 1
- description command
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- unchannelized SONET interfaces 1, 2
- description, interface
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2, 3, 4
- E3/T3 interfaces 1
- serial interfaces 1, 2, 3
- unchannelized SONET interfaces 1, 2
- Distance Vector Multicast Routing Protocol. See DVMRP tunnels1
- documentation set, E-series and JUNOSe 1
- comments on 1
- obtaining 1
- DS0 timeslots
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1, 2, 3, 4
- DS1. See T1 entries1
- DS3. See T3 entries1
- ds3-scramble command 1
- dsu commands
- dsu bandwidth 1
- dsu mode 1
- duplex command 1
- DVMRP tunnels 1
- dynamic tunnel-server ports
- applications supported 1
- overview 1
- unprovisioning 1
- dynamic tunnel-service interfaces
- monitoring 1
- overview 1
E
- E1
- fractional 1
- unframed 1
- E1 channels
- cOCx/STMx interfaces 1, 2
- E1 interfaces. See cOCx/STMx interfaces1
- E120 and E320 routers
- Ethernet interfaces 1
- tunnel-service interfaces 1
- E120 routers 1, 2, 3, 4
- E3 interfaces
- configuring controllers 1
- configuring HDLC channel 1
- loopback command 1
- monitoring interfaces 1
- numbering scheme 1
- references 1
- E320 routers 1, 2, 3, 4, 5
- 100 Gbps fabric 1, 2
- 120 Gbps fabric 1
- 320 Gbps fabric 1, 2
- SONET/SDH interfaces 1
- e3-scramble command 1
- equipment loopback command
- channelized T3 interfaces 1
- T3 interfaces 1
- ERX-14xx models 1
- ERX-310 router 1
- ERX-7xx models 1
- ES2 10G line module (LM) 1, 2, 3
- ES2 10G Uplink line module (LM) 1
- ES2 4G line module (LM) 1, 2, 3
- E-series and JUNOSe documentation set 1
- comments on 1
- obtaining 1
- E-series router models 1
- ethernet description command 1
- Ethernet interfaces
- commands
- ethernet description 1
- interface fastEthernet 1
- interface gigabitEthernet 1
- interface tenGigabitEthernet 1
- See also show commands1
- configuring 1
- disabling interfaces 1
- duplex type 1
- high-density 1
- IEEE 802.3ae 1, 2
- line speed 1
- MAC address validation 1
- monitoring 1
- numbering scheme 1, 2
- events
- APS/MSP 1
F
- facilities data link. See FDL1
- Fast Ethernet interfaces
- modules 1
- specifying an interface 1
- FDL (facilities data link)
- cOCx/STMx interfaces 1
- monitoring statistics 1
- T1 channel over DS3, configuring 1
- T1 over VT, configuring 1
- T1 channels on channelized T3 interfaces 1
- configuring 1
- monitoring statistics 1
- filtering
- show displays 1, 2, 3
- fractional T1/E1 1, 2
- fractional T3 1
- framing command
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- framing format
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2
- E3/T3 line 1
G
- Generic Routing Encapsulation. See GRE tunnels1
- Gigabit Ethernet interfaces
- modules 1
- redundant port 1, 2
- specifying an interface 1
- GRE (Generic Routing Encapsulation) tunnels 1
H
- HDLC channel, configuring
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- high-density Ethernet
- overview 1
- packet classifier 1
- supported modules 1, 2, 3, 4
I
- icons defined, notice 1
- idle character
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces 1
- idle-character command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces 1
- IEEE 802.1w 1
- IEEE 802.3 1
- IEEE 802.3ae 1, 2
- IEEE 802.3u 1
- IEEE 802.3z 1
- intelligent dropping of packets 1
- interface commands
- interface fastEthernet 1
- interface gigabitEthernet 1
- interface serial
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- interface tenGigabitEthernet 1
- interface description
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2, 3, 4
- E3/T3 interfaces 1
- serial interfaces 1, 2, 3
- unchannelized SONET interfaces 1, 2
- interface stack
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- ES2-21 OC48/STM16 POS 1
- OC48/STM16 interfaces 1
- OCx/STMx POS interfaces 1
- OCx/STMx/DS3-ATM interfaces 1
- interfaces, monitoring
- channelized T3 1
- cOCx/STMx 1
- E3/T3 1
- Ethernet 1
- OCx/STMx 1
- internal clocking 1
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1, 2
- E1 interfaces 1, 2
- E3/T3 interfaces 1
- OCx/STMx interfaces 1
- T1 interfaces 1, 2
- invert data command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- ip commands
- ip mac-validate 1
- IP tunnels
- secure 1, 2
- ISMs (IPSec Service modules)
- monitoring 1
- redundancy and interface distribution 1
J
- JUNOSe software CD 1
K
- K1 byte, APS/MSP 1
- K2 byte, APS/MSP 1
L
- L2TP (Layer 2 Tunneling Protocol) 1
- L2TP network server. See LNS1
- Layer 2 Tunneling Protocol. See L2TP1
- line clocking 1, 2
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1, 2
- E1interfaces 1, 2
- E3/T3 interfaces 1
- OCx/STMx interfaces 1
- T1 interfaces 1, 2
- line layer, SONET/SDH 1
- line modules
- changing 1, 2
- line speed 1
- link commands
- link failover force 1
- link failover timeout 1
- link selection 1
- LNS (L2TP network server)
- termination 1
- load-interval command
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- Ethernet interfaces 1
- local loopback
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- OCx/STMx interfaces 1
- loopback
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces 1
- T3 interfaces, remote 1
- loopback command
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- OCx/STMx interfaces 1
M
- MAC (media access control) addresses
- validation 1
- MAC pause frames 1
- maintenance data link. See MDL1
- manual switchover, APS/MSP 1
- manuals, E-series and JUNOSe 1
- comments on 1
- maximum receive unit. See MRU1, 2, 3
- maximum transmission unit. See MTU1, 2, 3
- max-interfaces command 1
- MDL (maintenance data link)
- channelized T3 interfaces 1
- configuring 1
- monitoring statistics 1
- T3 interfaces 1
- configuring 1
- monitoring statistics 1
- T3 on cOCx/STMx interfaces 1
- configuring 1
- monitoring statistics 1
- mdl commands
- mdl carrier 1, 2
- mdl string 1, 2
- mdl transmit 1, 2
- MIBs (Management Information Bases) 1
- models
- E120 1
- E320 1
- ERX-14xx 1
- ERX-310 1
- ERX-7xx 1
- monitoring. See specific feature, product, or protocol1
- MPLS (Multiprotocol Label Switching)
- fast reroute 1, 2
- MRU (maximum receive unit)
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- mru command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- MSP (Multiplex Section Protection) 1, 2
- MTU (maximum transmission unit)
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- Ethernet interfaces 1
- mtu command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- Ethernet interfaces 1
- Multiplex Section Protection. See APS/MSP; MSP1
- Multiprotocol Label Switching. See MPLS1
N
- network loopback
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- OCx/STMx interfaces 1
- notice icons defined 1
- numbering scheme
- ASP/MSP 1, 2
- slot/adapter/port 1, 2, 3
- slot/port 1, 2, 3, 4, 5, 6
O
- OC12 I/O modules 1
- OC3/STM1 GE/FE line module 1, 2
- OC3-2 GE APS I/O module 1, 2
- OC3-4 I/O modules 1, 2
- OCx/STMx interfaces
- configuring 1
- disabling 1
- line modules 1
- monitoring statistics 1
- numbering scheme 1
- path ds3 loopback remote command 1
- testing 1
- OCx/STMx POS line modules 1, 2
- OCx/STMx/DS3-ATM line modules 1, 2
P
- packet classifier 1
- packets
- intelligently dropping 1
- path commands
- path 1
- path description 1, 2
- path e1 unframed 1
- path overhead c2 1, 2
- path overhead j1 1, 2
- path snmp trap link-status 1, 2
- path trigger alarm 1, 2
- path trigger delay 1, 2
- path ds1 fdl commands
- path ds1 fdl 1
- path ds1 fdl carrier 1
- path ds1 fdl transmit 1
- path ds1 remote-loopback command 1
- path ds1|e1 commands
- path ds1|e1 1
- path ds1|e1 bert 1
- path ds1|e1 channel-group description 1
- path ds1|e1 channel-group shutdown 1
- path ds1|e1 channel-group snmp trap
link-status 1- path ds1|e1 channel-group timeslots 1
- path ds1|e1 clock source 1
- path ds1|e1 description 1
- path ds1|e1 framing 1
- path ds1|e1 loopback 1
- path ds1|e1 loopback remote 1
- path ds1|e1 shutdown 1
- path ds1|e1 snmp trap link-status 1
- path ds3 commands
- path ds3 1
- path ds3 bert 1
- path ds3 clock source 1
- path ds3 description 1
- path ds3 framing 1
- path ds3 loopback 1
- path ds3 loopback remote 1
- path ds3 shutdown 1
- path ds3 snmp trap link-status 1
- path ds3 mdl commands
- path ds3 mdl carrier 1
- path ds3 mdl string 1
- path ds3 mdl transmit 1
- path ds3 t1 commands
- path ds3 t1 1
- path ds3 t1 bert 1
- path ds3 t1 clock source 1
- path ds3 t1 description 1
- path ds3 t1 framing 1
- path ds3 t1 loopback 1
- path ds3 t1 loopback remote 1
- path ds3 t1 remote-loopback 1
- path ds3 t1 shutdown 1
- path ds3 t1 snmp trap link-status 1
- path ds3 t1 timeslots 1
- path ds3 t1 fdl commands
- path ds3 t1 fdl 1
- path ds3 t1 fdl carrier 1
- path ds3 t1 fdl transmit 1
- path layer, SONET/SDH 1
- pause frames 1
- payload loopback
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- platform considerations
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- Ethernet interfaces 1
- tunnel-service interfaces 1
- unchannelized SONET/SDH interfaces 1
- unchannelized T3/E3 interfaces 1
- ports, tunnel-server
- dedicated 1
- shared 1
- protect interface, APS/MSP 1, 2
R
- redundant port, Gigabit Ethernet 1, 2
- release notes 1
- remote loopback
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- T3 interfaces 1, 2
- reversion
- after switchover
- APS/MSP 1
- RSTP (Rapid Spanning Tree Protocol) 1
S
- scramble command 1
- sdh command 1, 2
- section layer, SONET/SDH 1
- secure IP tunnels 1, 2
- serial description command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- serial interfaces
- configuring
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- E3/T3 interfaces 1
- monitoring
- channelized T3 interfaces 1
- cOCx/STMx 1
- SFPs (small form-factor pluggable
transceivers) 1, 2- shared tunnel-server ports
- configuring 1
- overview 1
- supported applications 1
- supported modules 1
- show aps commands
- show aps 1
- show aps group 1
- show controllers commands
- show controllers e3 1
- show controllers sonet 1
- show controllers sonet configuration 1
- show controllers sonet ds1|e1 1
- show controllers sonet ds3 1
- show controllers sonet line | path | section 1
- show controllers sonet line | path | section | tributary 1
- show controllers t3 1, 2
- show controllers t3 ft1 1
- show controllers t3 remote 1, 2, 3
- show controllers t3 serial 1
- show displays, filtering 1, 2, 3
- show interfaces commands
- show interfaces fastEthernet 1
- show interfaces gigabitEthernet 1
- show interfaces serial
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- show interfaces tenGigabitEthernet 1
- show tunnel-server command 1
- shutdown command
- channelized T3 interfaces 1
- E3/T3 interfaces 1
- Ethernet interfaces 1
- OCx/STMx interfaces 1
- shutting down
- DS3 1
- E3/T3 interfaces 1
- SONET/SDH interface 1
- T1 channel 1, 2
- T1 subchannel 1, 2
- T1/E1 channel 1
- T1/E1 channel group 1
- T3 controller 1
- SMs (Service modules)
- monitoring 1
- redundancy and interface distribution 1
- SNMP (Simple Network Management Protocol) link status processing
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2, 3, 4, 5, 6
- OCx/STMx interfaces 1, 2
- snmp trap link-status command
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1
- OCx/STMx interfaces 1
- software, installing or updating 1
- SONET APS 1+1 redundancy. See APS/MSP1
- SONET/SDH (synchronous optical network/Synchronous Digital Hierarchy)
- alarms, configuring 1
- line layer 1
- line modules supported 1
- MPLS fast reroute 1, 2
- path layer 1
- section layer 1
- source, clock
- channelized T3 interfaces 1, 2
- E3/T3 interfaces 1
- OCx/STMx interfaces 1, 2
- speed command 1
- static tunnel-service interfaces
- monitoring 1
- overview 1
- subchannels
- configuring 1
- monitoring 1
- shutting down t1 1
- support, requesting 1
- switching mechanisms, APS/MSP 1, 2
- switchover
- APS/MSP 1
- Synchronous Digital Hierarchy. See SONET/SDH1
- synchronous optical network. See SONET/SDH1
T
- T1 channels
- channelized T3 interfaces 1
- cOCx/STMx interfaces 1, 2
- configuring 1
- t1 commands
- t1 bert 1
- t1 clock source 1
- t1 description 1
- t1 framing 1
- t1 loopback 1
- t1 remote-loopback 1
- t1 shutdown 1
- t1 snmp trap link-status 1
- t1 timeslots 1
- t1 yellow detect 1
- t1 yellow generate 1
- t1 fdl commands
- t1 fdl 1
- t1 fdl carrier 1
- t1 fdl string 1
- t1 fdl transmit 1
- T1, fractional 1
- T3 channels 1
- T3 controllers
- configuring 1
- monitoring 1
- T3 interfaces
- configuring controllers 1
- configuring HDLC channel 1
- configuring MDL 1
- equipment loopback command 1
- loopback command 1
- monitoring 1
- numbering scheme 1
- testing 1
- T3, fractional 1
- technical support, requesting 1
- testing interfaces
- channelized T3 1, 2
- cOCx/STMx 1, 2
- OCx/STMx 1, 2
- text and syntax conventions defined 1
- threshold command 1, 2
- time intervals 1, 2
- transmit clock source, configuring
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces 1
- OCx/STMx interfaces 1, 2
- transmit powers and cable length 1, 2
- tributary unit. See TU1
- trigger delay command 1, 2
- TU (tributary unit) 1
- tunnels
- configuring tunnel-service interfaces 1
- dedicated tunnel-server ports 1
- dynamic tunnel-server ports 1
- monitoring 1
- secure IP 1, 2
- tunnel-server ports
- dedicated 1
- shared 1
- tunnel-service interfaces
- configuring 1
- considerations 1
- E120 and E320 routers 1
- monitoring 1
- overview 1
- redundancy and interface distribution 1, 2
U
- unframed E1 1
V
- virtual tributary. See VT1
- VT (virtual tributary) 1
W
- working interface, APS/MSP 1, 2
X
- XFPs (10-gigabit small form-factor pluggable transceivers) 1, 2