JUNOSe 9.1.x Multicast Routing Configuration Guide > Configuring IPv6 Multicast > Enabling IPv6 Multicast

Enabling IPv6 Multicast

In this implementation, IPv6 multicast works on VRs. By default, IPv6 multicast is disabled on a VR. To enable IPv6 multicast on a VR, access the context for a VR, and then issue the ipv6 multicast-routing command.

ipv6 multicast-routing

• Use to enable IPv6 multicast routing on the VR.
• By default, IPv6 multicast is disabled on the VR. In the disabled state, all multicast protocols are disabled, and the VR forwards no multicast packets.
• Example

host1(config)#ipv6 multicast-routing

• Use the no version to disable IPv6 multicast routing on the VR (the default).